There is no need to remove the WebCam Cover since your MacBook will be able to close and enter sleep mode just fine with it attached. On the other hand, if you have a Retina MacBook Pro 13" 2016, we recommend going for our WebCam Cover Mini as it is
Since our Webcam Covers are only 0.5mm thick, there is no need to remove them when closing your MacBook Pro.
The dimensions of our Webcam Covers are 13 mm x 13 mm or 11mm x 11mm, so they are compatible with a MacBook Pro.Since the height is less than half a millimeter, it also won't interfere with sleep mode or the touch bar.
Our Webcam Covers would work perfectly fine with a MacBook Air.The product is 13mm x 13mm and 0.5mm thick.
Our Webcam Covers would work perfectly fine with a MacBook Pro 2016. On the other hand, if you have a Retina MacBook Pro 13" 2016, we recommend going for our Webcam Cover Mini as it is a bit smaller (11mm x 11mm).
Our Webcam Covers do not have white edges.The solid black (13mm x 13mm) and Mini (11mm x 11mm) both feature a clear sticky backing material.
The dimensions of our WebCam Covers are 13mm x 13mm or 11mm x 11mm, so they are compatible with the Logitech C920.
Our Webcam Covers feature a one-piece design that works better than the sliders.The sliders can and will eventually scratch your phone or laptop glass.Mic-Lock Webcam Covers come equipped with microscopic nano-suction cups that safely "sticks" on web
Our product is a non-adhesive based Webcam Cover made out of polyurethane. It will leave no glue or adhesive when you peel it back.It also works on negative air pressure, like silicone but has a stronger hold on the surface.Our Webcam Cover will also
The backing of our Webcam Cover is a special nano-tech material that is made of small suction cups which use negative air pressure to adhere to your camera cover surface.It will not damage any plastic, metal, glass, or painted material and will last
Our Webcam Cover works on negative air pressure and will stick to any electronic surface.Just peel it off and re-apply as desired.If it becomes less sticky, just rinse it under cold water and let it dry for 20 seconds to make it good as new.
Simply rinse the Webcam Cover with cold or room-temperature water and let it dry for about 20 seconds and it should be as good as new again.
Tape works with adhesive glues that will leave a residue and hurt the investment you made on your device.Our Webcam Cover uses nanotechnology and negative air pressure to ensure you can apply and reapply your Webcam Cover over 250,000 times.It will n
Certainly, you can apply and reapply your Webcam Cover daily.Mic-Lock Webcam Covers have been tested for over 250,000 applications, and if they become less sticky, simply rinse them quickly with water to make them as good as new.
The Webcam Cover will stick to any electronic's surface.
Yes, the material can be cut, but please use the sharpest cutting instrument to make sure it is a clean cut. Dull scissors will make the Webcam Cover fray. The scissors should be new or sharp. Alternatively, you may consider investing in a Mini Webca
The Webcam Cover is a physical barrier that secures your webcam so that no third party can see anything from that covered camera. It can be replaced on and off over 250,000 times.Rest assured, the labor of peeling it is worth the privacy given by the
Yes, the material can be cut to fit, but please use the sharpest cutting instrument to make sure it is a clean cut as dull scissors will make the Webcam Cover fray. Alternatively, you may consider investing in a Mini Webcam Cover (11mm x 11mm).
Even with the Webcam Cover on, you should be able to close your Surface Pro keyboard cover, and the magnetic clasp should still work fine.On the other hand, we would recommend going for our Webcam Cover Mini Black for any Surface Pro and MacBook Pro
The materials for our Webcam Covers are made in China while the final assembly, packaging and design are done in the USA.
The backing of our Webcam Cover is a special nano-tech material that is made of small suction cups that use negative air pressure to adhere to your camera's surface.Since our Webcam Covers do not use glue or any adhesive product, they will not gunk u
Webcam Covers are compatible with Macbook Pro 2015 Retina Display models.We recommend going for our Webcam Cover Mini as it may have a better fit (11mm x 11mm).
Yes, they will work with the iMac 21". Our Webcam Cover dimensions are 13mm x 13mm or 11mm x 11mm, ensuring a perfect fit.
Webcam Covers will work with any iMac Webcam. Our Webcam Cover dimensions are 13mm x 13mm or 11mm x 11mm, ensuring a perfect fit.The material will work on any electronic's surface for over 250,000 uses.
Our Webcam Covers are only 0.5mm thin, so your laptop should close just fine.